ParaZero SafeAir Mavic 3 is a parachute system designed specifically for the DJI Mavic 3 drone series. It's a safety solution that aims to protect your drone and the surrounding area in case of emergencies or malfunctions during flight.

These lightweight, foldable GCPs are easy to transport and carry. If the wind is a concern, simply use the 4 corner eyelets to anchor the GCP to the ground to ensure that the GCP stays in place. For survey, simply place the survey marker through the 3″ x 3″ center cutout of the GCP to perform precise aerial mapping with pre-established coordinates. With an ideal 60cm by 60cm size, these GCPs are perfect for UAV mapping. Take your drone mapping to new heights today with this new set of GCP 10 Pack, numbered from 0 to 9!

These lightweight, foldable GCPs are easy to transport and carry. If the wind is a concern, simply use the 4 corner eyelets to anchor the GCP to the ground to ensure that the GCP stays in place. For survey, simply insert the tip of your surveying rod into the center eyelet for a precision measurement every time. With an ideal 60cm by 60cm size, these GCPs are perfect for UAV mapping. Take your drone mapping to new heights today with this new set of GCP 10 Pack, numbered from 0 to 9!

The DroneBeacon db120 is a so-called direct or broadcast Remote ID long-range transponder, equipped with its own GPS and battery. A transponder is also called add-on, tracker, tag or (wireless) number plate. The DroneBeacon can be attached to any (consumer) drone using the 3M dual-lock tape. It is compliant with the (upcoming) standards in the EU and USA. The FAA has approved the db120 for usage in the USA. Furthermore, the transponder is optimized for long range due to its transmit power and antenna design. It also supports all transmission protocols for maximum flexibility. EASA - Declaration of conformity

The DroneBeacon db121 is a so-called direct or broadcast Remote ID long-range transponder, equipped with its own GPS receiver and needs to be powered by the drone. A transponder is also called add-on, tracker, tag or (wireless) number plate.  The db121 has two flavors: a transponder with enclosure or a PCB only. It is compliant with the (upcoming) standards in the EU and USA. The FAA has approved the db121/db121pcb for usage in the USA. Furthermore, the transponder is optimized for long range due to its transmit power and antenna design. It also supports all transmission protocols for maximum flexibility. EASA - Declaration of conformity

The DroneBeacon db122fpv is a so-called direct or broadcast Remote ID long-range transponder, that needs both an external GPS receiver and needs to be powered by the drone. It is low weight and designed for the FPV market, but can of course also be used for other drone applications as well. The db122fpv has two 6-pin Molex PicoBlade connectors. You need to connect a GPS receiver to the GPS IN port, such as the BN-880 GPS receiver. The module supports GPS receivers that output the NMEA GPS protocol. The GPS OUT connector needs to be connected to the drone for power. The board will also relay the received GPS data to this GPS OUT port. The db122fpv is compliant with the (upcoming) standards in the EU and USA. The FAA has approved the db122fpv for usage in the USA. Furthermore, the transponder supports all transmission protocols for maximum flexibility. EASA - Declaration of conformity

DroneScout is a (direct/broadcast) Remote ID receiver that receives Remote ID signals. A receiver is also called sensor or radar. The EU and USA are planning new rules that make Remote ID mandatory for drones over 250 grams weight.  Technically Remote ID is called Direct Remote ID (DRI) in the EU and Broadcast Remote ID in the USA.

DroneScout is a (direct/broadcast) Remote ID receiver that receives Remote ID signals. A receiver is also called sensor or radar. The EU and USA are planning new rules that make Remote ID mandatory for drones over 250 grams weight.  Technically Remote ID is called Direct Remote ID (DRI) in the EU and Broadcast Remote ID in the USA. The ds240 barebone is the ds240 receiver without antennas, surge protectors and antenna cables. You need to install use your own antennas!

The Hugerock T71 is a rugged tablet designed for industrial use. It has a 7-inch display with a resolution of 1080x1920, and is powered by an octa-core processor. It runs Android 10 or 11 and comes with 8GB of RAM and 128GB of storage.

The OWL Drone Parachute for DJI M350 RTK is a safety system designed to protect your drone and the surrounding area in the event of a loss of control or malfunction. It is specifically made for the DJI M350 RTK drone and uses the drone's flight sensor data to determine the best time to deploy the parachute.

The ParaZero SafeAir M-350 Pro is an autonomous drone parachute recovery system designed specifically for the DJI M350 RTK drone. It is compliant with EASA (European Union Aviation Safety Agency) MOC Light-UAS.2511 standards and ASTM F3322-18, which means it meets regulatory requirements for safety and reliability.

The ParaZero SafeAir M-300 Pro parachute is a drone safety system designed to bring a DJI M300 drone safely to the ground in case of an emergency. It is compliant with EASA (European Union Aviation Safety Agency) regulation MOC Light-UAS.2511, meaning it meets safety standards for Light-UAS (Unmanned Aerial Systems) up to 25 kg (55 lb). It is also ASTM F3322-18 compliant, which is the standard for parachutes used on model aircraft.

The ParaZero SafeAir Mavic 3 with Manual Deployment RC parachute is a safety system designed for the DJI Mavic 3 drone. Easy installation: Advertised as being easy to install within 10 minutes. MOC 2511 compliant: Meets the European Union's Mandatory Occurrence Category (MOC) 2511 standard for drone safety.

These lightweight, foldable GCPs are easy to transport and carry. If the wind is a concern, simply use the 4 corner eyelets to anchor the GCP to the ground to ensure that the GCP stays in place. For survey, simply place the survey marker through the 3" x 3" center cutout of the GCP to perform precise aerial mapping with pre-established coordinates. With an ideal 120cm by 120cm size, these GCPs are perfect for UAV mapping. Take your drone mapping to new heights today with this new set of GCP 5 Pack!

The ParaZero SafeAir M-30 is a parachute recovery system designed specifically for the DJI M30 series of drones. It's a safety system that automatically deploys a parachute in case of a critical drone failure, bringing the drone down to the ground for a safe and controlled landing.

ParaZero SafeAir Mavic is a drone safety system designed specifically for DJI's Mavic Pro and Mavic 2 series drones (excluding modular accessories). It's essentially a parachute system that automatically deploys in case of a critical flight failure, protecting your drone and potentially people or property on the ground.