Flyfire focuses on aviation safety and uses technology to promote the safe development ofindustry-grade drones. The new generation of industry-grade UAV parachute OWL descentspeed is only 3.5m/s, built-in dual sensor redundancy, access to DJI M300 OSDK to obtainreal-time UAV sensor data, the two data fusion judgments are used as the basis for openingthe parachute, which doubles the reliability.
OWL is equipped with Flyfire safety algorithm, and the hazard response time is lowered to 0.5 seconds. In case of emergency, the parachute can also be opened manually. The speed is stabilized at 3.5m per second. (test weight 9 kg)
During the forced landing, the high-power buzzer continuously sends out the 110DB warning sound to remind pedestrians on the ground to avoid and protect their safety.
Install OWL, remove the M300 arm screws (please refer to the manual installation tutorial fordetails), and use the OWL replacement screws to install the bottom rack in place in only 50seconds (the bottom rack does not need to be disassembled), which perfectly matches theDJI M300 drone ，
After removing the parachute bin, the bottom rack will not affect the foldingof the aircraft. When using oWL, you can install the parachute bin in just three steps, no needto wait, and immediately play.
Ultra High Reliability
Dual IMU Dual Barometer
Automatically Fuse M300 Flight Sensor Data
OWL’s important sensor hardware is dual-redundant design, and the Flyfire safety algorithm seamlessly integrates DJI environmental perception data and its own sensor data. Once a dangerous situation occurs, OWL can quickly identify and send the parachute opening and drone suspension instructions within 0.5 seconds to protect ground personnel and Property safety.
Lightweight And Wind Resistance
Thanks to the use of ABS engineering materials and 7075- -T6 (sn) metal materials by Flyfire engineers,
The maximum structural strength and optimal performance are achieved when the product quality is the smallest (800g). The impact of M300’s battery life is only 4 minutes and 15 seconds.
The base is reinforced with carbon fiber board, which is lighter in weight and stronger in structure. Protect OWL and DJI M300 at the moment of opening the umbrella.
The fluid appearance design effectively reduces the wind resistance and reduces the extra endurance loss caused by wearing OWL during operation. It fully fits the back of the DJI M300，flying smoothly, and does not affect all functions of the lower load.
Maintenance-Free For 2 Years
OWL has a fully-sealed Parachute bin structure, and the whole machine has an IPX5 protection level, which is not afraid of dust and rain. The parachute bin has a built- in environmental monitoring system to monitor the internal temperature and humidity of the parachute bin all the time. Under normal circumstances, it is maintenance free for 2 years, which is a solid backing for your flight.
|Application||Matrice 300 RTK|
|Area of parachute fabric||7.29m²|
|Minimum parachute opening height||20m (Only when the height exceeds 20m will the parachute opening function be activated.）|
|Standard load||9kg (The speed reduction is ensured at the load of 3-4m/s)|
|Maximum load||9kg (Exceeding 9kg may cause structural damage to the parachute)|
|Classification of wind resistance||Level 7|
|The lowering speed||3m/s-4.5m/s,It can effectively protect the landing safety of aircraft|
|Duration of flight||1h,Even if the aircraft suddenly loses power, OWL can still fly for an hour|
|Motherboard battery capacity||210mA|
|Motherboard TF card capacity||16G,The high-capacity memory card can record one-hour flight for 100 times and record each flight in real time|
|Remote control date cable||OSDK|
|Maximum Omni-Directional Signal Distance (No Interference, No Occlusion)||SRRC：320m|
|Operating Voltage/ Current||5V/1.5A(Instantaneous Maximum Current)|