Swellpro’s waterproof 3 axis thermal camera combines both a high resolution thermal infrared camera and a full HD low-light camera with a dimmable LED flashlight, which can provide both infrared and visible light imaging simultaneously.
Use the thermal imaging to identify objects of interest, then quickly switch to the low-light mode to better identify the object with more detail. The integration of the GC3-T with the SD4 empowers lots of industries to accomplish their missions smarter and faster with far less risk and cost.
The aerial thermal imaging can help firefighters see through smoke and farmers monitor crop health from above, or to assist in search and rescue operations.
3Axis Gimbal Thermal Camera (GC3-T) |
| Waterproof： | IP67 |
| Axis： | 3 axis(pitch,roll,yaw) |
| Pitching angle： | -90°to 0° |
| Maximum control speed: | Pitching 60°/s |
| Weight： | Approx. 450g |
| Size： | 110*100*115mm |
| Low Light Camera | |
| Image Sensor: | 1/2″ 2M Starlight CMOS |
| Lens: | FOV: 66° |
| Burst Photo： | Shut/3/5/10pcs |
| Interval Photo: | Shut/1/3/5/10s |
| Video Resolution: | FHD: 1920*1080 30/60p | HD: 1280*720 120/60p |
| Max Video Stream: | 64Mbps |
| Picture Format: | JPEG |
| Video Format: | MP4 / MOV |
| Support Memory Card: | Micro SD CARDS with a maximum capacity of 128GB, write speed ≥15 MB/s, and transmission speed of Class 10 or above or UHS-1 rating are supported |
| Working temperature： | -10℃ to 40℃ |
| IR Camera | |
| Image Sensor: | Vanadium oxide uncooled infrared focal plane detector |
| Lens: | 19mm/25mm |
| Resolution@frame rate: | 640*512 @30p/48p/50p |
| Palette: | White hot / black hot / Rainbow / Rainbow high contrast / iron red / lava / Sky / medium gray / grey red / purple orange / Special 1 / warning red / ice fire / cyan red / special 2 / gradient red / gradient green / gradient blue / warning green / warning blue |
| Crosshairs： | Show (default), hide, move |
| Contrast Ratio： | Slider adjustment (0-255), default middle value |
| Brightness: | Slider adjustment (0-511), default middle value |
| DDE gear (image enhancement): | Off / On (default on) |
| Temperature measurement OSD on / off: | Off / On (the default displays the highest, lowest, and center point temperatures) |
| Temperature measurement unit： | Centigrade, Kelvin, Fahrenheit |
| Temperature measurement alarm： | Off, low temperature alarm, high temperature alarm, high and low temperature alarm |
| Low temperature alarm setting: | -20℃～+150℃ |
| High temperature alarm setting: | -20℃～+150℃ |
Reviews
There are no reviews yet.