Survey Pole with a smartphone mount.
Get all the advantages of surveying with Emlid
| 0.74 m folded
Lightweight and compact construction at only 0.74 m in closed length is handy for field trips. The three-section construction easily extends to 1.8 m and delivers reliable stability with the help of solid flip locks. The industry-standard 5/8″ thread provides compatibility with the majority of geodesic equipment. Lightweight and stable to bending. You can carry your pole with a receiver attached without worrying about dropping it. The smartphone mount only needs to be set up on your survey pole once, as you don’t need to remove it. Just fold it when the work is completed and fit your survey pole into its carrying bag. |
 |
|---|
Get started
 |
 |
 |
 |
 |
|---|---|---|---|---|
| 1. Take out survey pole and a tip from the package |
2. Using a 24 mm wrench, screw the tip to the survey pole in a clockwise direction up to the stop Apply LOCTITE® to the thread to prevent loosening from vibration and shock. |
3. Fully extend and close the flip locks Make sure all the flip locks are closed. Watch your fingers when closing the flip locks. |
4. Mount the receiver using the 5/8″ thread on the survey pole and carefully tighten it by hand up to the stop If it is necessary to replace the sharp end of the survey pole, use a 14 mm wrench. |
5. Set up a smartphone mount
Make sure the control device is properly balanced in the mount. |
Reviews
There are no reviews yet.